Photographs may show modified designs. All images are copyrighted.

  • Plan 556-4

  • 384 sq ft
  • 1 beds
  • 1 baths
  • 33' wide
  • 16' deep
more details
Houzz
Email Print

Floor Plans

Main Floor Plan

Plan Description

The Jungle Shelter was designed with hot, humid climates in mind. A pier foundation and fiber cement panel siding is standard with this shelter design package. Additional siding options are available for this design and include stucco or shiplap wood. Exterior walls are constructed from 2x6 studs with spray foam cavity insulation, providing superior thermal resistance to the elements. The roof construction consists of exposed beam and decking with six inches of rigid foam board insulation. A thatch roof covering will protect the rubber roof finish below from harmful UV rays while adding aesthetic appeal. Rubber roofing was chosen for its durability and affordability. Mounting solar panels on the roof of this shelter is not feasible so a pole mounted array would need to be considered. Thelarge roof overhangs shield the facade from rainfall and also provides adequate shading of windows.

This house plan also includes a solar PV system design, rainwater harvesting system design and a full material list.

Specifications

Area

Total Sq Ft
384 sq ft
Main Floor Sq Ft
384 sq ft

Ceiling

Ceiling Details

Dimension

Width
33'
Depth
16'

Basic Features

Baths
1
Stories
1
Bedrooms
1
Garage Stalls
0

Roof

Roof Type
Roof Framing
Stick
Roof Load

Exterior Wall Framing

Framing
2x6
Exterior Wall Finish
Insulation
Spray Foam Cavity Insulation

Pricing

Plan Set Price

PDF Set
$1250.00
5 Copy Set
$1450.00

Foundation Price

Crawlspace
+$0.00
Slab
+$0.00

Additional copies can be ordered at the time of purchase and within 90 days after your original purchase date.

Plan Content

All plans are drawn at ¼” scale or larger and include :

  • Foundation Plan: Drawn to 1/4" scale, this page shows all necessary notations and dimensions including support columns, walls and excavated and unexcavated areas.
  • Exterior Elevations: A blueprint picture of all four sides showing exterior materials and measurements.
  • Floor Plan(s): Detailed plans, drawn to 1/4" scale for each level showing room dimensions, wall partitions, windows, etc. as well as the location of electrical outlets and switches.
  • Cross Section: A vertical cutaway view of the house from roof to foundation showing details of framing, construction, flooring and roofing.
  • Interior Elevations: Detailed drawings of kitchen cabinet elevations and other elements as required.

Cost-to-Build

To help you determine if this plan will fit within your budget, our Cost-to-Build™ report will provide you a location specific Cost-to-Build™, which is based on your zip code. Order a Cost-to-Build™ Report today to get an accurate, location specific construction cost for any house plan on Houseplans.com. It's a great way to budget your project and compare different plans. It's an easy process and one of our expert plan advisors will take you through a comprehensive interview to determine the materials, finishes, fixtures and more to help you know in advance the likely cost to build a new home from Houseplans.com's blueprints.

Cost-to-Build Report

Best Price Policy

Some of our plans are also available on other websites and in printed catalogs. We are committed to selling these plans at or below the lowest price available elsewhere. If you find a regularly priced plan (not “on-sale”) for a lower price, we'll beat the advertised price by 5%. We will match the price for any on-sale plans.

More details »

Important Information

All sales on house plans and customization/modifications are final. No refunds or exchanges can be given once your order has started the fulfillment process.

All house plans from Houseplans are designed to conform to the local codes when and where the original house was constructed.

In addition to the house plans you order, you may also need a site plan that shows where the house is going to be located on the property. You might also need beams sized to accommodate roof loads specific to your region. Your home builder can usually help you with this. You may also need a septic design unless your lot is served by a sanitary sewer system. Many areas now have area-specific energy codes that also have to be followed. This normally involves filling out a simple form providing documentation that your house plans are in compliance.

To find out what documents you should expect with your house plans, see what's included?

In some regions, there is a second step you will need to take to insure your house plans are in compliance with local codes. Some areas of North America have very strict engineering requirements. Examples of this would be, but not limited to, earthquake-prone areas of California and the Pacific Coast, hurricane risk areas of the Florida, Gulf & Carolina Coasts. New York, New Jersey, Nevada, and parts of Illinois require review by a local professional as well. If you are building in these areas, it is most likely you will need to hire a state licensed structural engineer to analyze the design and provide additional drawings and calculations required by your building department. If you aren’t sure, building departments typically have a handout they will give you listing all of the items they require to submit for and obtain a building permit.

Additionally, stock plans do not have a professional stamp attached. If your building department requires one, they will only accept a stamp from a professional licensed in the state where you plan to build. In this case, you will need to take your house plans to a local engineer or architect for review and stamping. In addition, plans which are used to construct homes in Nevada are required to be drawn by a licensed Nevada architect.

Best Price Guaranteed

Plan Price $1250.00

what's included?

Plan Type

5 printed plan sets and a license to build a single home.

8 copies of the basic package, a single build license and a Cost to Build Report.

For use by design professionals to make substantial changes to your house plan.

For making minor changes to your house plans. This is a set of drawings printed on Vellum or Bond, that comes with a copyright release.

Recommended PDF sets are best for fast, electronic delivery and inexpensive, local printing.

One printed set for bidding purposes only. Not a legal building set.

PDF sets are best for fast, electronic delivery. Not for construction.

Foundation Type

or call to order: 1-800-913-2350

How much will this cost to build?

This plan can be modified!

Also by This Designer

Signature Modern Front Elevation Plan #556-1 - Houseplans.com
Plan 556-1 from $1250.00
Saved!
672 sq ft 1 bed 1 bath
1 story 41' wide 16' deep
Signature Cottage Front Elevation Plan #556-2 - Houseplans.com
Plan 556-2 from $1250.00
Saved!
606 sq ft 1 bed 1 bath
2 story 24' wide 16' deep
Signature Cottage Front Elevation Plan #556-3 - Houseplans.com
Plan 556-3 from $1250.00
Saved!
688 sq ft 1 bed 1 bath
1 story 30' wide 24' deep
See all signature plans by Off Grid Shelters LLC
Have a Question?

You can also give us a call at 1-800-913-2350 (6am - 6pm) M-F to ask us your question(s).

Thank you for your inquiry. We will try to respond to your question within 24 hours and often respond within minutes, even after hours.