Logo

Visit Houseplans.com today or call 1-800-913-2350

Houseplans.com Plan #437-42 Front Elevation
Plan 437-42
Bedrooms 4
Baths 3.50
Potential Bedrooms 0
Garage Stalls 3
Stories 2
Lower Floor Sq Ft 1493 sq ft
Total Sq Ft 3498 sq ft
Patios Sq Ft 340 sq ft
Main Floor Sq Ft 2005 sq ft
Garage Sq Ft 748 sq ft
Porch Sq Ft 269 sq ft
Decks Sq Ft 340 sq ft
Height 25 ft
Width 77 ft
Depth 49 ft
Exterior Wall Finish stone, siding
Framing 2"x4"
Roof Pitch 10:12
Roof Type Asphalt Shingle
Roof Framing Conventional Frame
Daylight Basement true
Additional House Features
  • Split Bedrooms
  • Main Floor Master Bed Bath
  • Main Floor Bed Bath
  • Walk In Closet
  • Walk In Pantry Cabinet Pantry
  • Peninsula Eating Bar
  • Kitchen Island
  • Storage Area
  • Open Floor Plan
  • Exercise Room
  • Den Office Study Computer
  • Great Room Living Room
  • Unfinished Future Space
  • Media Room
  • Hobby Rec Room Game Room
  • Oversized Garage
  • Side Entry Garage
  • Covered Front Porch
  • Grill Deck Sundeck
  • Suited For Narrow Lot
  • Suited For Corner Lot
  • Storage Area
  • Open Floor Plan
  • Exercise Room
  • Den Office Study Computer
  • Great Room Living Room
  • Unfinished Future Space
  • Media Room
  • Hobby Rec Room Game Room
  • Teen Suite Jack Jill Bath
Additional Styles Classifications
  • Country / Farmhouse
Lower Floor Main Floor
Plan Set Price
Reproducible Set
$1300.00
CAD Set
$1500.00
PDF Set
$1300.00
Foundation Price
Daylight Basement
+$0.00
Right-Reading Reverse Price
Each
+$200.00

In addition to the house plans you order, you may also need a site plan that shows where the house is going to be located on the property. You might also need beams sized to accommodate roof loads specific to your region. Your home builder can usually help you with this. You may also need a septic design unless your lot is served by a sanitary sewer system. Many areas now have area-specific energy codes that also have to be followed. This normally involves filling out a simple form providing documentation that your house plans are in compliance.

To find out what documents you should expect with your house plans, see http://houseplans.com/whats-included.

In some regions, there is a second step you will need to take to insure your house plans are in compliance with local codes. Some areas of North America have very strict engineering requirements. Examples of this would be earthquake-prone areas of California and the Pacific Coast, hurricane risk areas of the Florida, Gulf & Carolina Coasts. New York, New Jersey, Nevada, and parts of Illinois require review by a local professional as well. If you are building in these areas, it is most likely you will need to hire a state licensed structural engineer to analyze the design and provide additional drawings and calculations required by your building department. If you aren’t sure, building departments typically have a handout they will give you listing all of the items they require to submit for and obtain a building permit.

Additionally, stock plans do not have a professional stamp attached. If your building department requires one, they will only accept a stamp from a professional licensed in the state where you plan to build. In this case, you will need to take your house plans to a local engineer or architect for review and stamping. In addition, plans which are used to construct homes in Nevada are required to be drawn by a licensed Nevada architect.

Note: All sales on house plans are final. No refunds or exchanges can be given once your order has been fulfilled or once we have begun to customize a home plan to your specifications.