Logo

Visit Houseplans.com today or call 1-800-913-2350

Houseplans.com Plan #426-17 Front Elevation
Plan 426-17
Bedrooms 5
Baths 4.00
Potential Bedrooms 0
Garage Stalls 2
Stories 2
Lower Floor Sq Ft 1191 sq ft
Total Sq Ft 3086 sq ft
Main Floor Sq Ft 1895 sq ft
Garage Sq Ft 557 sq ft
Porch Sq Ft 261 sq ft
Storage Sq Ft 140 sq ft
Decks Sq Ft 733 sq ft
Height 31 ft
Width 47 ft
Depth 53 ft
Exterior Wall Finish LOG SIDING
Framing 2"x6"
Roof Pitch 2 6:12
Roof Pitch 4:12
Roof Type Truss
Lower Ceiling Ft 10 ft
Garage Ceiling Ft 10 ft
Main Ceiling Ft 8 ft
Additional House Features
  • Garage Under
Additional Styles Classifications
  • Country / Farmhouse
  • Log
Lower Floor Main Floor
Plan Set Price
Reproducible Set
$850.00
5 Copy Set
$750.00
CAD Set
$1500.00
Foundation Price
Slab
+$0.00
Additional Construction Sets Price
Each Additional Set
+$40.00
Right-Reading Reverse Price
Each
+$100.00
Mirror Reversed Sets Price
Each Additional Set
+$50.00

In addition to the house plans you order, you may also need a site plan that shows where the house is going to be located on the property. You might also need beams sized to accommodate roof loads specific to your region. Your home builder can usually help you with this. You may also need a septic design unless your lot is served by a sanitary sewer system. Many areas now have area-specific energy codes that also have to be followed. This normally involves filling out a simple form providing documentation that your house plans are in compliance.

To find out what documents you should expect with your house plans, see http://houseplans.com/whats-included.

In some regions, there is a second step you will need to take to insure your house plans are in compliance with local codes. Some areas of North America have very strict engineering requirements. Examples of this would be earthquake-prone areas of California and the Pacific Coast, hurricane risk areas of the Florida, Gulf & Carolina Coasts. New York, New Jersey, Nevada, and parts of Illinois require review by a local professional as well. If you are building in these areas, it is most likely you will need to hire a state licensed structural engineer to analyze the design and provide additional drawings and calculations required by your building department. If you aren’t sure, building departments typically have a handout they will give you listing all of the items they require to submit for and obtain a building permit.

Additionally, stock plans do not have a professional stamp attached. If your building department requires one, they will only accept a stamp from a professional licensed in the state where you plan to build. In this case, you will need to take your house plans to a local engineer or architect for review and stamping. In addition, plans which are used to construct homes in Nevada are required to be drawn by a licensed Nevada architect.

Note: All sales on house plans are final. No refunds or exchanges can be given once your order has been fulfilled or once we have begun to customize a home plan to your specifications.