Logo

Visit Houseplans.com today or call 1-800-913-2350

Houseplans.com Plan #472-1 Front Elevation
Plan 472-1
Bedrooms 4
Baths 4.50
Potential Bedrooms 0
Garage Stalls 3
Stories 2
Total Sq Ft 3559 sq ft
Main Floor Sq Ft 2791 sq ft
Upper Floor Sq Ft 768 sq ft
Garage Sq Ft 696 sq ft
Height 30 ft
Width 85 ft
Depth 58 ft
Framing 2"x4"
Roof Load 20
Roof Pitch 9:12
Roof Framing stick
Main Ceiling Ft 10 ft
Upper Ceiling Ft 10 ft
Additional House Features
  • Main Floor Master Bed Bath
  • Guest Suite
  • Walk In Pantry Cabinet Pantry
  • Nook Breakfast Area Dining
  • Volume Vaulted Ceiling
  • Family Room Keeping Room
  • Great Room Living Room
  • Main Floor Laundry
  • Master Sitting Area
  • Side Entry Garage
  • Covered Rear Porch
  • Volume Vaulted Ceiling
  • Family Room Keeping Room
  • Great Room Living Room
  • Main Floor Laundry
  • Master Sitting Area
Additional Styles Classifications
  • Classical
Main Floor Upper Floor
Plan Set Price
PDF Set
$1375.00
Reproducible Set
$1375.00
5 Copy Set
$1045.00
8 Copy Set
$1155.00
CAD Set
$2475.00
Foundation Price
Basement
+$0.00
Crawlspace
+$0.00
Slab
+$0.00
Additional Construction Sets Price
Each Additional Set
+$100.00
Right-Reading Reverse Price
Each
+$300.00

In addition to the house plans you order, you may also need a site plan that shows where the house is going to be located on the property. You might also need beams sized to accommodate roof loads specific to your region. Your home builder can usually help you with this. You may also need a septic design unless your lot is served by a sanitary sewer system. Many areas now have area-specific energy codes that also have to be followed. This normally involves filling out a simple form providing documentation that your house plans are in compliance.

To find out what documents you should expect with your house plans, see http://houseplans.com/whats-included.

In some regions, there is a second step you will need to take to insure your house plans are in compliance with local codes. Some areas of North America have very strict engineering requirements. Examples of this would be earthquake-prone areas of California and the Pacific Coast, hurricane risk areas of the Florida, Gulf & Carolina Coasts. New York, New Jersey, Nevada, and parts of Illinois require review by a local professional as well. If you are building in these areas, it is most likely you will need to hire a state licensed structural engineer to analyze the design and provide additional drawings and calculations required by your building department. If you aren’t sure, building departments typically have a handout they will give you listing all of the items they require to submit for and obtain a building permit.

Additionally, stock plans do not have a professional stamp attached. If your building department requires one, they will only accept a stamp from a professional licensed in the state where you plan to build. In this case, you will need to take your house plans to a local engineer or architect for review and stamping. In addition, plans which are used to construct homes in Nevada are required to be drawn by a licensed Nevada architect.

Note: All sales on house plans are final. No refunds or exchanges can be given once your order has been fulfilled or once we have begun to customize a home plan to your specifications.