Logo

Questions about this plan? Visit Houseplans today or call 1-800-913-2350

You can view this plan at houseplans.com/p/509-28

Plan #509-28

Craftsman Front Elevation Plan #509-28 - Houseplans.com
  • 8247 sq ft
  • 4 beds
  • 4.5 baths
  • 159' wide
  • 86' deep

Pricing

Mirror Reversed Sets
Each Additional Set
+$0.00
Plan Set
5 Copy Set
$2500.00
8 Copy Set
$2700.00
CAD Set
$5000.00
PDF Set
$3298.00
Reproducible Set
$3298.00
Single Set
$2000.00
Foundation
Crawlspace
+$0.00
Right-Reading Reverse
Each
+$500.00
Additional Construction Sets
Each Additional Set
+$75.00

House Features

  • In Law Suite
  • Guest Suite
  • 2 Master Suites
  • Split Bedrooms
  • Main Floor Master Bed Bath
  • Nook Breakfast Area Dining
  • Kitchen Island
  • Peninsula Eating Bar
  • Walk In Pantry Cabinet Pantry
  • Main Floor Laundry
  • Unfinished Future Space
  • Hobby Rec Room Game Room
  • Wet Bar
  • Exercise Room
  • Media Room
  • Great Room Living Room
  • Master Sitting Area
  • Bonus Play Flex Room
  • Den Office Study Computer
  • Storage Area
  • Tandem Garage
  • Grill Deck Sundeck
  • Covered Front Porch
  • Covered Rear Porch
  • Outdoor Kitchen Grill
  • Suited For Vacation Home
  • Unusual Shape
  • Unique Features
  • Suited For View Lot
  • Main Floor Laundry
  • Unfinished Future Space
  • Hobby Rec Room Game Room
  • Wet Bar
  • Exercise Room
  • Media Room
  • Great Room Living Room
  • Master Sitting Area
  • Bonus Play Flex Room
  • Den Office Study Computer
  • Storage Area

Styles Classifications

  • Bungalow
  • Craftsman
  • Farmhouse
  • Country

Specifications

Upper Floor Sq Ft 2162 sq ft
Total Sq Ft 8247 sq ft
Main Floor Sq Ft 6085 sq ft
Height 30'
Depth 86'
Width 159'
Roof Type Composition
Primary Pitch 5:12
Roof Load 60
Main Ceiling Ft 10'
Ceiling Details Great Room and Master Suite and Foyer are open timber trussed at 16 feet tall. Family room is a beam and decking ceiling.
Upper Ceiling Ft 9'
Main Floor Plan
Upper Floor Plan

In addition to the house plans you order, you may also need a site plan that shows where the house is going to be located on the property. You might also need beams sized to accommodate roof loads specific to your region. Your home builder can usually help you with this. You may also need a septic design unless your lot is served by a sanitary sewer system. Many areas now have area-specific energy codes that also have to be followed. This normally involves filling out a simple form providing documentation that your house plans are in compliance.

To find out what documents you should expect with your house plans, see http://houseplans.com/whats-included.

In some regions, there is a second step you will need to take to insure your house plans are in compliance with local codes. Some areas of North America have very strict engineering requirements. Examples of this would be earthquake-prone areas of California and the Pacific Coast, hurricane risk areas of the Florida, Gulf & Carolina Coasts. New York, New Jersey, Nevada, and parts of Illinois require review by a local professional as well. If you are building in these areas, it is most likely you will need to hire a state licensed structural engineer to analyze the design and provide additional drawings and calculations required by your building department. If you aren’t sure, building departments typically have a handout they will give you listing all of the items they require to submit for and obtain a building permit.

Additionally, stock plans do not have a professional stamp attached. If your building department requires one, they will only accept a stamp from a professional licensed in the state where you plan to build. In this case, you will need to take your house plans to a local engineer or architect for review and stamping. In addition, plans which are used to construct homes in Nevada are required to be drawn by a licensed Nevada architect.

Note: All sales on house plans are final. No refunds or exchanges can be given once your order has been fulfilled or once we have begun to customize a home plan to your specifications.