How much will customizations cost?
Minor to moderate changes range from $250 to $700. If you make extensive changes
to a large house, you may spend a few thousand dollars. If that seems like a
lot, remember that custom house plans can cost as much as $5 per square foot,
and the average stock house plan cost is about $700. You're still saving
thousands. Keep in mind that requested changes may affect the total square
footage-or width and depth-of the design.
In general, most people who customize a house plan spend between $700 to $1500 for the changes. The cost is directly affected by the complexity of the changes and the amount of labor involved. Your cost may be more or less depending upon the time needed to make your changes. If an exterior wall is moved, then more changes are involved because the changes affect more aspects of the drawings (such as the roof, foundation, exterior views, etc.). If exterior walls are not involved, the cost is normally less.
top of page
What are the most commonly requested customizations to plans?
Following are the most common customization requests: Eliminating windows, fireplaces, false dormers Rearranging certain interior walls Changing ceiling heights Changing exterior surfaces (brick, siding, stucco) Changing exterior wall framing (2x4 to 2x6 or ICF) Changing a foundation type. Relocating garage door openings / adding or eliminating bays. Kitchen or bath layout change. Changing an exterior elevation style. Adding or eliminating a room. Stretching house plans in either width or depth. Adding a bonus room over the garage. Reducing or increasing the square footage of the home.
top of page
Is it necessary to have plans customized? Can't I just do the changes myself during construction?
Often times, yes. It is perfectly normal to do what is called 'red-lining' changes you intend to make to the plans. Many changes can be made during construction without customizing the house plan, saving you additional design fees. However, this is dependent on your local building codes and the flexibility of your local building department. Consult with your home builder to determine whether the changes you want to make are feasible without having the design customized.
top of page
Why do I need to purchase a Reproducible Master in order to have customizations made?
The changes to the plan will have permission from the original designer to alter the drawings. Second, you will be sent the customized Reproducible after completion of the customizations and you will be able to make legal copies of the plans for your builder, lender, building department, and subcontractors. (It is illegal to make copies of a house plan without a Copyright Release from the original designer). Last, Reproducibles are on a special type of semi-transparent paper that allows professionals to both erase and copy. Regular blueprints are not erasable, nor are they able to be copied.
top of page
How long does it take to have customizations made?
It varies; depending upon our customization professional's workload at the time and the complexity of the design. It is usually between 1-6 weeks.
top of page
Can your plans be adapted for universal design?
Yes, some plans will be easier than others to adapt, but there are always ways to customize plans to adapt to special needs.
top of page
Will my home plans come with a seal or stamp?
Stock plans do not have a professional stamp affixed. If your building department requires one, they will only accept a stamp from a state-licensed professional where you plan to build. In this case, you will need to have your house plans reviewed and stamped by a local engineer or architect.
top of page
Do the plans include engineering?
No. Even custom home designs don't include engineering. Engineering is an entirely different profession. If your plans need engineering, you will need to hire a local professional familiar with engineering requirements in the location you intend to build.
top of page
Will my customized design include a Material List?
No. However, your local lumber yard will usually provide one for you at no cost if you purchase your lumber from them.
top of page
Will my plans conform to my local building code?
All of our house plans are designed to conform to the local codes where the original house was built. All building codes in the United States are similar because they meet industry-standard minimums that are based on three nationally recognized standards. Building codes are standards created to ensure the structural safety of buildings. They are established and enforced by your local government, usually through your city or county's building department. Every state, county, and local municipality has adopted their codes from one of the three nationally recognized building codes: UBC (Uniform Building Code), BOCA (Building Officials and Code Administrators), and CABO (Council of American Building Officials).The new IRC (International Residential Code) is a combination of the other three and is fast becoming the National Standard. All are very similar in content. You may request that your quote include IRC code compliance.
top of page
What if I don't like the way the plans turn out after I receive the customized drawings?
This is unlikely, but in the event you don't like the plans, the customization work still needs to be paid for. There are no refunds on customization services. You will need to pay for the cost of the blueprint master and the cost of labor that has been preformed for you. For example if you decide not to finish the final design phase then you are still responsible for paying for the cost of the blueprint masters and the preliminary design work that was done for you. The estimate you receive will show you the total cost to complete the changes you requested and the estimate will usually be broken down in to two phases of design work. If your changes are fairly simple then there may only be one phase of design work needed.
top of page
Will the plans include electrical, plumbing & mechanical details?
Location of heating, air-condititioning, duct work & water heaters will not usually be shown on plans since local codes and climate as well as your preference of heating and cooling systems varies. Your builder and subcontractors will help you determine selection and logical placement of equipment. The only plumbing related information that will be on the plans is the location of fixtures such as sinks, tubs, showers, etc. Electrical schematics, (location of lights, plugs & switches) is typically included unless otherwise noted.
top of page
