Questions about this plan? Visit today or call 1-800-913-2350

View this plan at

Plan 124-208

2427 sq/ft,
3 beds,
3.5 baths,
90' 2" wide,
70' 5" deep


Plan Set
PDF Print Set
5 Copy and PDF Set
Eight Copy and PDF Set
PDF Master Set
Master Builder Package
Single Set
Right-Reading Reverse
Additional Construction Sets
Each Additional Set
Additional Use License
Audio Video Design
Construction Guide

House Features

Main Floor Master Bedroom
Split Bedrooms
Upstairs Bedrooms
Walk In Closet
Breakfast Nook
Eating Bar
Kitchen Island
Walk In Pantry Cabinet Pantry
Great Room Living Room
Main Floor Laundry
Mud Room
Play Flex Room
Detached Garage
Side Entry Garage
Friend S Entry
Suited For Corner Lot
Suited For View Lot
Covered Front Porch
Covered Rear Porch
Wrap Around Porch
Empty Nester
Suited For Vacation Home

Styles Classifications



328 sq/ft
First Floor
1584 sq/ft
Second Floor
844 sq/ft
70' 5"
90' 2"
Primary Pitch
Roof Framing
Roof Load
Main Ceiling

Floor Plan - Main Floor

Craftsman Floor Plan - Main Floor Plan #124-208

Floor Plan - Upper Floor

Craftsman Floor Plan - Upper Floor Plan #124-208
Questions about this plan? Visit today or call 1-800-913-2350

View this plan at

In addition to the house plans you order, you may also need a site plan that shows where the house is going to be located on the property. You might also need beams sized to accommodate roof loads specific to your region. Your home builder can usually help you with this. You may also need a septic design unless your lot is served by a sanitary sewer system. Many areas now have area-specific energy codes that also have to be followed. This normally involves filling out a simple form providing documentation that your house plans are in compliance.

To find out what documents you should expect with your house plans, see

In some regions, there is a second step you will need to take to insure your house plans are in compliance with local codes. Some areas of North America have very strict engineering requirements. Examples of this would be earthquake-prone areas of California and the Pacific Coast, hurricane risk areas of the Florida, Gulf & Carolina Coasts. New York, New Jersey, Nevada, and parts of Illinois require review by a local professional as well. If you are building in these areas, it is most likely you will need to hire a state licensed structural engineer to analyze the design and provide additional drawings and calculations required by your building department. If you aren’t sure, building departments typically have a handout they will give you listing all of the items they require to submit for and obtain a building permit.

Additionally, stock plans do not have a professional stamp attached. If your building department requires one, they will only accept a stamp from a professional licensed in the state where you plan to build. In this case, you will need to take your house plans to a local engineer or architect for review and stamping. In addition, plans which are used to construct homes in Nevada are required to be drawn by a licensed Nevada architect.

Note: All sales on house plans are final. No refunds or exchanges can be given once your order has been fulfilled or once we have begun to customize a home plan to your specifications.