Questions about this plan? Visit today or call 1-800-913-2350

View this plan at

Plan 119-363

5699 sq/ft,
5 beds,
7 baths,
94' wide,
59' deep


Plan Set
5 Copy and PDF Set
CAD Single Build
Walk Out Basement
Right-Reading Reverse
Audio Video Design
Construction Guide
Lighting Design
Unlimited Use License

House Features

Guest Suite
Main Floor Bedrooms
Walk In Closet
Breakfast Nook
Butler's Pantry
Eating Bar
Kitchen Island
Walk In Pantry Cabinet Pantry
Family Room Keeping Room
Great Room Living Room
Master Sitting Area
Storage Area
Oversized Garage
Side Entry Garage
Suited For Corner Lot
Suited For View Lot
Covered Front Porch
Grill Deck Sundeck

Styles Classifications



Basement Unfinished
3094 sq/ft height 10'
First Floor
3344 sq/ft height 10'
724 sq/ft
407 sq/ft
Second Floor
2355 sq/ft height 10'
Primary Pitch
Roof Framing
Combination Truss/Conventional
Main Ceiling
Upper Ceiling Ft

Floor Plan - Main Floor

Classical Floor Plan - Main Floor Plan #119-363

Floor Plan - Upper Floor

Classical Floor Plan - Upper Floor Plan #119-363

Floor Plan - Lower Floor

Classical Floor Plan - Lower Floor Plan #119-363
Questions about this plan? Visit today or call 1-800-913-2350

View this plan at

In addition to the house plans you order, you may also need a site plan that shows where the house is going to be located on the property. You might also need beams sized to accommodate roof loads specific to your region. Your home builder can usually help you with this. You may also need a septic design unless your lot is served by a sanitary sewer system. Many areas now have area-specific energy codes that also have to be followed. This normally involves filling out a simple form providing documentation that your house plans are in compliance.

To find out what documents you should expect with your house plans, see

In some regions, there is a second step you will need to take to insure your house plans are in compliance with local codes. Some areas of North America have very strict engineering requirements. Examples of this would be earthquake-prone areas of California and the Pacific Coast, hurricane risk areas of the Florida, Gulf & Carolina Coasts. New York, New Jersey, Nevada, and parts of Illinois require review by a local professional as well. If you are building in these areas, it is most likely you will need to hire a state licensed structural engineer to analyze the design and provide additional drawings and calculations required by your building department. If you aren’t sure, building departments typically have a handout they will give you listing all of the items they require to submit for and obtain a building permit.

Additionally, stock plans do not have a professional stamp attached. If your building department requires one, they will only accept a stamp from a professional licensed in the state where you plan to build. In this case, you will need to take your house plans to a local engineer or architect for review and stamping. In addition, plans which are used to construct homes in Nevada are required to be drawn by a licensed Nevada architect.

Note: All sales on house plans are final. No refunds or exchanges can be given once your order has been fulfilled or once we have begun to customize a home plan to your specifications.