Questions about this plan? Visit Houseplans today or call 1-800-913-2350

You can view this plan at houseplans.com/p/120-171

Plan #120-171

Lodge style craftsman house 1900 sft by Texas Architect David Wiggins
  • 1848 sq ft
  • 3 beds
  • 2 baths
  • 79' wide
  • 71' deep


Plan Set
5 Copy Set
8 Copy Set
Study Set
Daylight Basement
Right-Reading Reverse
Additional Construction Sets
Each Additional Set

House Features

  • Main Floor Master Bedroom
  • Split Bedrooms
  • Main Floor Bedrooms
  • Walk In Closet
  • Walk In Pantry Cabinet Pantry
  • Kitchen Island
  • Peninsula Eating Bar
  • Breakfast Nook
  • Main Floor Laundry
  • Unfinished Future Space
  • Master Sitting Area
  • Media Room
  • Workshop
  • Mud Room
  • Storage Area
  • Family Room Keeping Room
  • Hobby Rec Room Game Room
  • Bonus Play Flex Room
  • Side Entry Garage
  • Outdoor Kitchen Grill
  • Grill Deck Sundeck
  • Covered Rear Porch
  • Covered Front Porch
  • Empty Nester
  • Suited For Vacation Home
  • Unusual Shape
  • Suited For View Lot
  • Suited For Corner Lot
  • Suited For Sloping Lot
  • Main Floor Laundry
  • Unfinished Future Space
  • Master Sitting Area
  • Media Room
  • Workshop
  • Mud Room
  • Storage Area
  • Family Room Keeping Room
  • Hobby Rec Room Game Room
  • Bonus Play Flex Room

Styles Classifications

  • Craftsman


Bonus Sq Ft 302 sq ft
Porch Sq Ft 448 sq ft
Patios Sq Ft 281 sq ft
Garage Sq Ft 549 sq ft
Storage Sq Ft 244 sq ft
Main Floor Sq Ft 1848 sq ft
Total Sq Ft 1848 sq ft
Width 79'
Height 30'
Depth 71'
Roof Framing stick
Roof Load 20
Primary Pitch 12:12
Ceiling Details Stepped ceiling in Family, Dining and Master Suite starting at 12' and going up from there.
Garage Ceiling Ft 8'
Main Ceiling Ft 10'
Bonus Ceiling Ft 9'
Floor Plan - Main Floor Plan
Floor Plan - Upper Floor Plan

In addition to the house plans you order, you may also need a site plan that shows where the house is going to be located on the property. You might also need beams sized to accommodate roof loads specific to your region. Your home builder can usually help you with this. You may also need a septic design unless your lot is served by a sanitary sewer system. Many areas now have area-specific energy codes that also have to be followed. This normally involves filling out a simple form providing documentation that your house plans are in compliance.

To find out what documents you should expect with your house plans, see http://houseplans.com/whats-included.

In some regions, there is a second step you will need to take to insure your house plans are in compliance with local codes. Some areas of North America have very strict engineering requirements. Examples of this would be earthquake-prone areas of California and the Pacific Coast, hurricane risk areas of the Florida, Gulf & Carolina Coasts. New York, New Jersey, Nevada, and parts of Illinois require review by a local professional as well. If you are building in these areas, it is most likely you will need to hire a state licensed structural engineer to analyze the design and provide additional drawings and calculations required by your building department. If you aren’t sure, building departments typically have a handout they will give you listing all of the items they require to submit for and obtain a building permit.

Additionally, stock plans do not have a professional stamp attached. If your building department requires one, they will only accept a stamp from a professional licensed in the state where you plan to build. In this case, you will need to take your house plans to a local engineer or architect for review and stamping. In addition, plans which are used to construct homes in Nevada are required to be drawn by a licensed Nevada architect.

Note: All sales on house plans are final. No refunds or exchanges can be given once your order has been fulfilled or once we have begun to customize a home plan to your specifications.