Questions about this plan? Visit Houseplans today or call 1-800-913-2350

You can view this plan at houseplans.com/p/84-602

Plan #84-602

European Exterior - Front Elevation Plan #84-602 - Houseplans.com
  • 4031 sq ft
  • 3 beds
  • 4 baths
  • 72' wide
  • 100' deep


Mirror Reversed Sets
Each Additional Set
Plan Set
5 Copy Set
8 Copy Set
Reproducible Set
Single Set
Right-Reading Reverse
Additional Construction Sets
Each Additional Set

House Features

  • Walk In Closet
  • Main Floor Bedrooms
  • Split Bedrooms
  • Main Floor Master Bedroom
  • Peninsula Eating Bar
  • Breakfast Nook
  • Walk In Pantry Cabinet Pantry
  • Kitchen Island
  • Library Room
  • Main Floor Laundry
  • Family Room Keeping Room
  • Master Sitting Area
  • Side Entry Garage
  • Covered Rear Porch
  • Covered Front Porch
  • Library Room
  • Main Floor Laundry
  • Family Room Keeping Room
  • Master Sitting Area

Styles Classifications

  • Traditional
  • European
  • Tudor


Main Floor Sq Ft 3442 sq ft
Total Sq Ft 4031 sq ft
Upper Floor Sq Ft 589 sq ft
Garage Sq Ft 852 sq ft
Porch Sq Ft 695 sq ft
Decks Sq Ft 199 sq ft
Width 72'
Depth 100'
Height 38'
Roof Type gables
Primary Pitch 10:12
Secondary Pitch 14:12
Garage Ceiling Ft 9'
Upper Ceiling Ft 9'
Main Ceiling Ft 12'
Ceiling Details 11' Tier in Master 10' Vault in Bdrm 2 & 3 10' Tier in Library Cathedral Ceiling in Family 12' Vault in Upper Deck
Floor Plan - Main Floor Plan
Floor Plan - Upper Floor Plan

In addition to the house plans you order, you may also need a site plan that shows where the house is going to be located on the property. You might also need beams sized to accommodate roof loads specific to your region. Your home builder can usually help you with this. You may also need a septic design unless your lot is served by a sanitary sewer system. Many areas now have area-specific energy codes that also have to be followed. This normally involves filling out a simple form providing documentation that your house plans are in compliance.

To find out what documents you should expect with your house plans, see http://houseplans.com/whats-included.

In some regions, there is a second step you will need to take to insure your house plans are in compliance with local codes. Some areas of North America have very strict engineering requirements. Examples of this would be earthquake-prone areas of California and the Pacific Coast, hurricane risk areas of the Florida, Gulf & Carolina Coasts. New York, New Jersey, Nevada, and parts of Illinois require review by a local professional as well. If you are building in these areas, it is most likely you will need to hire a state licensed structural engineer to analyze the design and provide additional drawings and calculations required by your building department. If you aren’t sure, building departments typically have a handout they will give you listing all of the items they require to submit for and obtain a building permit.

Additionally, stock plans do not have a professional stamp attached. If your building department requires one, they will only accept a stamp from a professional licensed in the state where you plan to build. In this case, you will need to take your house plans to a local engineer or architect for review and stamping. In addition, plans which are used to construct homes in Nevada are required to be drawn by a licensed Nevada architect.

Note: All sales on house plans are final. No refunds or exchanges can be given once your order has been fulfilled or once we have begun to customize a home plan to your specifications.