Questions about this plan? Visit today or call 1-800-913-2350

View this plan at

Plan 137-347

4555 sq/ft,
5 beds,
4 baths,
76' 10" wide,
82' 9" deep


Plan Set
5 Copy Set
8 Copy Set
Single Set
Wood 2x6
Additional Construction Sets
Each Additional Set
Audio Video Design
Comprehensive Material List
Construction Guide
Mirror Reversed Sets
Each Additional Set

House Features

Formal Dining Room
Main Floor Master Bedroom
Split Bedrooms
Breakfast Nook
Kitchenette Wet Bar
Den Office Study Computer
Family Room Keeping Room
Hobby Rec Room Game Room
Main Floor Laundry
Open Floor Plan
Storage Area
Side Entry Garage
Wheelchair Adaptable

Styles Classifications



505 sq/ft height 10'
First Floor
2610 sq/ft height 11'
Second Floor
1945 sq/ft height 10'
82' 9"
39' 8"
76' 10"
Primary Pitch
Roof Framing
Roof Type

Floor Plan - Main Floor

Colonial Floor Plan - Main Floor Plan #137-347

Floor Plan - Upper Floor

Colonial Floor Plan - Upper Floor Plan #137-347
Questions about this plan? Visit today or call 1-800-913-2350

View this plan at

In addition to the house plans you order, you may also need a site plan that shows where the house is going to be located on the property. You might also need beams sized to accommodate roof loads specific to your region. Your home builder can usually help you with this. You may also need a septic design unless your lot is served by a sanitary sewer system. Many areas now have area-specific energy codes that also have to be followed. This normally involves filling out a simple form providing documentation that your house plans are in compliance.

To find out what documents you should expect with your house plans, see

In some regions, there is a second step you will need to take to insure your house plans are in compliance with local codes. Some areas of North America have very strict engineering requirements. Examples of this would be earthquake-prone areas of California and the Pacific Coast, hurricane risk areas of the Florida, Gulf & Carolina Coasts. New York, New Jersey, Nevada, and parts of Illinois require review by a local professional as well. If you are building in these areas, it is most likely you will need to hire a state licensed structural engineer to analyze the design and provide additional drawings and calculations required by your building department. If you aren’t sure, building departments typically have a handout they will give you listing all of the items they require to submit for and obtain a building permit.

Additionally, stock plans do not have a professional stamp attached. If your building department requires one, they will only accept a stamp from a professional licensed in the state where you plan to build. In this case, you will need to take your house plans to a local engineer or architect for review and stamping. In addition, plans which are used to construct homes in Nevada are required to be drawn by a licensed Nevada architect.

Note: All sales on house plans are final. No refunds or exchanges can be given once your order has been fulfilled or once we have begun to customize a home plan to your specifications.