Questions about this plan? Visit today or call 1-800-913-2350

View this plan at

Plan 1066-125

4313 sq/ft,
5 beds,
4.5 baths,
56' 8" wide,
69' 6" deep


Plan Set
5 Copy Set
8 Copy Set
Single Set
Wood 2x6
Right-Reading Reverse
Additional Construction Sets
Each Additional Set
Audio Video Design
Construction Guide
Mirror Reversed Sets
Each Additional Set

House Features

Guest Suite
Upstairs Bedrooms
Upstairs Master Bedrooms
Walk In Closet
Breakfast Nook
Eating Bar
Kitchen Island
Walk In Pantry Cabinet Pantry
Den Office Study Computer
Family Room Keeping Room
Great Room Living Room
Mud Room
Upstairs Laundry
Front Entry Garage
Tandem Garage
Covered Front Porch
Covered Rear Porch
Additional Half Bath

Styles Classifications



568 sq/ft
Main Floor
2126 sq/ft
196 sq/ft
79 sq/ft
Upper Floor
2187 sq/ft
69' 6"
30' 8"
56' 8"
Primary Pitch
Roof Framing
Roof Load
25 PSF
Roof Type
Composition Shingles
Ceiling Details
Foyer and family room ceilings are open to above.
Garage Ceiling
11' 6"
Main Ceiling
Upper Ceiling Ft

Floor Plan - Main Floor

Contemporary Floor Plan - Main Floor Plan #1066-125

Floor Plan - Upper Floor

Contemporary Floor Plan - Upper Floor Plan #1066-125
Questions about this plan? Visit today or call 1-800-913-2350

View this plan at

In addition to the house plans you order, you may also need a site plan that shows where the house is going to be located on the property. You might also need beams sized to accommodate roof loads specific to your region. Your home builder can usually help you with this. You may also need a septic design unless your lot is served by a sanitary sewer system. Many areas now have area-specific energy codes that also have to be followed. This normally involves filling out a simple form providing documentation that your house plans are in compliance.

To find out what documents you should expect with your house plans, see

In some regions, there is a second step you will need to take to insure your house plans are in compliance with local codes. Some areas of North America have very strict engineering requirements. Examples of this would be earthquake-prone areas of California and the Pacific Coast, hurricane risk areas of the Florida, Gulf & Carolina Coasts. New York, New Jersey, Nevada, and parts of Illinois require review by a local professional as well. If you are building in these areas, it is most likely you will need to hire a state licensed structural engineer to analyze the design and provide additional drawings and calculations required by your building department. If you aren’t sure, building departments typically have a handout they will give you listing all of the items they require to submit for and obtain a building permit.

Additionally, stock plans do not have a professional stamp attached. If your building department requires one, they will only accept a stamp from a professional licensed in the state where you plan to build. In this case, you will need to take your house plans to a local engineer or architect for review and stamping. In addition, plans which are used to construct homes in Nevada are required to be drawn by a licensed Nevada architect.

Note: All sales on house plans are final. No refunds or exchanges can be given once your order has been fulfilled or once we have begun to customize a home plan to your specifications.