Logo

Questions about this plan? Visit Houseplans.com today or call 1-800-913-2350

You can view this plan at https://www.houseplans.com/plan/2464-square-feet-4-bedrooms-2-5-bathroom-ranch-house-plans-2-garage-7240

Plan 60-169

2464 sq/ft,
4 beds,
2.5 baths,
120' wide,
44' deep

Pricing

Plan Set
5 Copy Set
$900.00
Reproducible Set
$950.00
CAD Set
$1700.00
Single Set
$680.00
Foundation
Basement
+$0.00
Additional Construction Sets
Each Additional Set
+$60.00/each
Audio Video Design
Each
$100.00
Construction Guide
Each
$39.00
Home Furniture Planner
Each
$19.00
Lighting Design
Each
$100.00

House Features

Walk In Closet
Breakfast Nook
Kitchen Island
Den Office Study Computer
Family Room Keeping Room
Den Office Study Computer
Family Room Keeping Room
Side Entry Garage
Friend S Entry
Suited For Corner Lot
Suited For View Lot
Covered Front Porch

Styles Classifications

Ranch House Plans and Floor Plan Designs
Country House Plans
Farmhouse Plans

Specifications

First Floor
2464 sq/ft
Depth
44'
Height
22' 9"
Width
120'
Roof Framing
Combination Truss/Conventional
Roof Type
Asphalt

Floor Plan - Main Floor Plan

Ranch Floor Plan - Main Floor Plan Plan #60-169
Logo
Questions about this plan? Visit Houseplans.com today or call 1-800-913-2350

You can view this plan at https://www.houseplans.com/plan/2464-square-feet-4-bedrooms-2-5-bathroom-ranch-house-plans-2-garage-7240

In addition to the house plans you order, you may also need a site plan that shows where the house is going to be located on the property. You might also need beams sized to accommodate roof loads specific to your region. Your home builder can usually help you with this. You may also need a septic design unless your lot is served by a sanitary sewer system. Many areas now have area-specific energy codes that also have to be followed. This normally involves filling out a simple form providing documentation that your house plans are in compliance.

To find out what documents you should expect with your house plans, see https://www.houseplans.com/whats-included.

In some regions, there is a second step you will need to take to insure your house plans are in compliance with local codes. Some areas of North America have very strict engineering requirements. Examples of this would be earthquake-prone areas of California and the Pacific Coast, hurricane risk areas of the Florida, Gulf & Carolina Coasts. New York, New Jersey, Nevada, and parts of Illinois require review by a local professional as well. If you are building in these areas, it is most likely you will need to hire a state licensed structural engineer to analyze the design and provide additional drawings and calculations required by your building department. If you aren’t sure, building departments typically have a handout they will give you listing all of the items they require to submit for and obtain a building permit.

Additionally, stock plans do not have a professional stamp attached. If your building department requires one, they will only accept a stamp from a professional licensed in the state where you plan to build. In this case, you will need to take your house plans to a local engineer or architect for review and stamping. In addition, plans which are used to construct homes in Nevada are required to be drawn by a licensed Nevada architect.

Note: All sales on house plans are final. No refunds or exchanges can be given once your order has been fulfilled or once we have begun to customize a home plan to your specifications.