Photographs may show modified designs. All images are copyrighted.
672 sq ft
Floor PlansMain Floor Plan
Customize any features!
Our in-house design team can help you make all the modifications you have in mind in order to make this your dream home.Get Free Quote
Full Specs & Features
Exterior Wall Framing
What's included in this plan set
- Floor Plans Including electrical
- Foundation Plan
- Cross Sections and other detail sections when required
- Cabinet and Stair Details
- Exterior Elevations - All four sides
- Cover Page with artists rendering
- Misc. Construction and Code Notes
Plan Set Price
Additional Construction Sets $45.00/each
Material List $50.00
Additional copies can be ordered at the time of purchase and within 90 days after your original purchase date.
All sales on house plans and customization/modifications are final. No refunds or exchanges can be given once your order has started the fulfillment process.
All house plans from Houseplans are designed to conform to the local codes when and where the original house was constructed.
In addition to the house plans you order, you may also need a site plan that shows where the house is going to be located on the property. You might also need beams sized to accommodate roof loads specific to your region. Your home builder can usually help you with this. You may also need a septic design unless your lot is served by a sanitary sewer system. Many areas now have area-specific energy codes that also have to be followed. This normally involves filling out a simple form providing documentation that your house plans are in compliance.
To find out what documents you should expect with your house plans, see what's included?
In some regions, there is a second step you will need to take to insure your house plans are in compliance with local codes. Some areas of North America have very strict engineering requirements. Examples of this would be, but not limited to, earthquake-prone areas of California and the Pacific Coast, hurricane risk areas of the Florida, Gulf & Carolina Coasts. New York, New Jersey, Nevada, and parts of Illinois require review by a local professional as well. If you are building in these areas, it is most likely you will need to hire a state licensed structural engineer to analyze the design and provide additional drawings and calculations required by your building department. If you aren’t sure, building departments typically have a handout they will give you listing all of the items they require to submit for and obtain a building permit.
Additionally, stock plans do not have a professional stamp attached. If your building department requires one, they will only accept a stamp from a professional licensed in the state where you plan to build. In this case, you will need to take your house plans to a local engineer or architect for review and stamping. In addition, plans which are used to construct homes in Nevada are required to be drawn by a licensed Nevada architect.
How much will this cost to build?
This plan can be modified!
Also by This Designer
|2577 sq ft||3 bed||2.5 bath|
|2 story||80' wide||51' deep|
|3690 sq ft||3 bed||2.5 bath|
|3 story||44' wide||45' deep|
|1677 sq ft||2 bed||2 bath|
|2 story||28' wide||40' deep|
|1362 sq ft||2 bed||2 bath|
|2 story||35' wide||40' deep|
|1949 sq ft||4 bed||2.5 bath|
|2 story||55' wide||32' deep|
|1537 sq ft||2 bed||2 bath|
|1 story||62' wide||50' deep|
|2370 sq ft||4 bed||2.5 bath|
|2 story||71' wide||35' deep|
|1426 sq ft||3 bed||2.5 bath|
|2 story||36' wide||50' deep|
|2904 sq ft||4 bed||3 bath|
|2 story||66' wide||49' deep|
|2651 sq ft||4 bed||3 bath|
|2 story||48' wide||39' deep|