Photographs may show modified designs. All images are copyrighted.

  • Plan 124-654

  • 816 sq ft
  • 0 beds
  • 0 baths
  • 36' wide
  • 25' deep
more details
Email Print

Floor Plans

Main Floor Plan

Saved! Mediterranean Style House Plan - 0 Beds 0 Baths 816 Sq/Ft Plan #124-654 Main Floor Plan -


Basic Features

Garage Stalls
Potential Bedrooms


Main Floor Sq Ft
816 sq ft
Garage Sq Ft
816 sq ft
Total Sq Ft
816 sq ft


Primary Pitch

Additional Room Features


Lot Characteristics

Suited For Narrow Lot
Suited For Corner Lot

Structural Information Provided

Structural 1st Floor Framing
Foundation Drawing
Structural Roof Framing




Main Ceiling Ft

Exterior Wall Framing

Exterior Wall Finish

Garage Features

Detached Garage

Code Compliance

Irc 2006


Plan Set Price

5 Copy Set
8 Copy Set
Reproducible Set

Foundation Price


Right-Reading Reverse $40.00

Additional copies can be ordered at the time of purchase and within 90 days after your original purchase date.

Plan Content

Each plan set is drawn at 1/4"=1' scale and includes the following drawings:

  • Artist's Rendering: An artist's drawing of the home, usually viewed from the front, and general construction notes.
  • Elevations: Shows the front, sides, and rear, including exterior materials, trim sizes, roof pitches, etc.
  • Main Floor Plan: Shows placement and dimensions of walls, doors, & windows. Includes the location of appliances, plumbing fixtures, beams, ceiling heights, etc.
  • Second Floor Plan (if any): Shows the second floor in the same detail as the main floor. Includes second floor framing and details.
  • Foundation Plan: Shows the location of all concrete footings, floor beams, first floor framing, and foundation details. If there is a basement, a basement plan is included which shows all basement details. Foundation types vary; please call to confirm the foundation type of the plan you are interested in.
  • Floor Framing Plan (if any): Shows location and spacing of floor joists and supporting walls or beams.
  • Roof Framing Plan: Shows roof outlines, conventional framing/trusses, beams, roof framing details, etc. Specific details such as fireplaces, stairways, decks, etc. Details are drawn at 1/2" = 1' scale, and appear as needed throughout the prints.
  • Section: Shows a cross-section of the home. Shows support members, exterior and interior materials, insulation, and foundation.
  • Electrical Plan: A schematic layout of all lighting, switches and electrical outlets.


To help you determine if this plan will fit within your budget, our Cost-to-Build™ report will provide you a location specific Cost-to-Build™, which is based on your zip code. Order a Cost-to-Build™ Report today to get an accurate, location specific construction cost for any house plan on It's a great way to budget your project and compare different plans. It's an easy process and one of our expert plan advisors will take you through a comprehensive interview to determine the materials, finishes, fixtures and more to help you know in advance the likely cost to build a new home from's blueprints.

Cost-to-Build Report

Best Price Policy

Some of our plans are also available on other websites and in printed catalogs. We are committed to selling these plans at or below the lowest price available elsewhere. If you find a regularly priced plan (not “on-sale”) for a lower price, we'll beat the advertised price by 5%. We will match the price for any on-sale plans.

More details »

Important Information

All sales on house plans and customization/modifications are final. No refunds or exchanges can be given once your order has started the fulfillment process.

All house plans from Houseplans are designed to conform to the local codes when and where the original house was constructed.

In addition to the house plans you order, you may also need a site plan that shows where the house is going to be located on the property. You might also need beams sized to accommodate roof loads specific to your region. Your home builder can usually help you with this. You may also need a septic design unless your lot is served by a sanitary sewer system. Many areas now have area-specific energy codes that also have to be followed. This normally involves filling out a simple form providing documentation that your house plans are in compliance.

To find out what documents you should expect with your house plans, see what's included?

In some regions, there is a second step you will need to take to insure your house plans are in compliance with local codes. Some areas of North America have very strict engineering requirements. Examples of this would be, but not limited to, earthquake-prone areas of California and the Pacific Coast, hurricane risk areas of the Florida, Gulf & Carolina Coasts. New York, New Jersey, Nevada, and parts of Illinois require review by a local professional as well. If you are building in these areas, it is most likely you will need to hire a state licensed structural engineer to analyze the design and provide additional drawings and calculations required by your building department. If you aren’t sure, building departments typically have a handout they will give you listing all of the items they require to submit for and obtain a building permit.

Additionally, stock plans do not have a professional stamp attached. If your building department requires one, they will only accept a stamp from a professional licensed in the state where you plan to build. In this case, you will need to take your house plans to a local engineer or architect for review and stamping. In addition, plans which are used to construct homes in Nevada are required to be drawn by a licensed Nevada architect.

Best Price Guaranteed

Plan Price $165.00

what's included?

Plan Type

5 printed plan sets and a license to build a single home.

8 copies of the basic package, a single build license and a Cost to Build Report.

For use by design professionals to make substantial changes to your house plan.

For making minor changes to your house plans. This is a set of drawings printed on Vellum or Bond, that comes with a copyright release.

Recommended PDF sets are best for fast, electronic delivery and inexpensive, local printing.

One printed set for bidding purposes only. Not a legal building set.

PDF sets are best for fast, electronic delivery. Not for construction.

Foundation Type

Additional Options
or call to order: 1-800-913-2350

How much will this cost to build?

This plan can be modified!

Also by This Designer

craftsman house by Eugene Oregon designer 27,000 sft
Plan 124-582 from $825.00
2674 sq ft 4 bed 3.5 bath
2 story 83' wide 60' deep
Craftsman Front Elevation Plan #124-867 -
Plan 124-867 from $825.00
2319 sq ft 3 bed 2.5 bath
1 story 55' wide 62' deep
Craftsman Front Elevation Plan #124-887 -
Plan 124-887 from $825.00
2283 sq ft 3 bed 2.5 bath
1 story 74' wide 64' deep
Ranch style country home elevation
Plan 124-624 from $825.00
2145 sq ft 3 bed 2.5 bath
1 story 86' wide 56' deep
barn garage with stalls and/or garage below and large room above.
Plan 124-865 from $330.00
2962 sq ft 0 bed 0 bath
2 story 54' wide 36' deep
Craftsman style home, Country Home Design elevation
Plan 124-925 from $975.00
3815 sq ft 3 bed 2.5 bath
2 story 134' 11" wide 87' 5" deep
Modern Photo Plan #124-920 -
Plan 124-920 from $775.00
1888 sq ft 3 bed 2.5 bath
2 story 26' wide 59' deep
Mediterranean Front Elevation Plan #124-713 -
Plan 124-713 from $975.00
3231 sq ft 3 bed 3.5 bath
2 story 74' wide 57' deep
Craftsman style home, elevation
Plan 124-828 from $825.00
2838 sq ft 4 bed 3 bath
2 story 64' wide 55' deep
Cottage Photo Plan #124-868 -
Plan 124-868 from $825.00
2686 sq ft 4 bed 4 bath
2 story 34' wide 93' deep
See all plans by this designer
Have a Question?

You can also give us a call at 1-800-913-2350 (6am - 6pm) M-F to ask us your question(s).

Thank you for your inquiry. We will try to respond to your question within 24 hours and often respond within minutes, even after hours.