Don't lose your saved plans! 
Create an account to access your saves whenever you want. See our Terms & Conditions and Privacy Policy.
OR

European House Plan 927-417 4284 Sq Ft, 5 Bed, 5.5 Bath, 2 Floor, 3 Garage

3D icon
Get Personalized Help
Key Specs
  • 5
    Beds
  • 5.5
    Baths
  • 2
    Floors
  • 3
    Garages
  • 4284
    Square Feet
The stately facade evokes a timeless grandeur of days long gone. The interior boasts an open layout enhanced by lofty ceilings and abundant windows. Upgraded ceiling treatments add architectural interest. Indulge in the warmth of two first-floor fireplaces. The rear deck and covered porch are ideal for large gatherings. The second floor houses three family bedrooms and room to expand. A laundry chute here is a useful convenience.


Special offer for builders! Select a CAD, PDF, or Reproducible format, and you will receive an unlimited use license at no additional cost. Build as many times as you like with no re-use fees! This offer only applies to plans bearing this note. Unless explicitly noted, a purchased plan may only be built once. An unlimited use license is not transferable.

Questions on this plan?

New to the process and looking for some help to kick things off? Let us know a bit about your plans and we’ll be happy to help.

Budget & Customization Tools

Modify icon
Customize this Plan
Tell us about your desired changes and we can prepare an estimate.
Cost to Build icon
Cost to Build Report
A personalized estimate based on your location, plan, & materials.
Cost to Build icon
Residential Construction Guide
This downloadable, 26-page guide is full of diagrams and details about plumbing, electrical, and more.

Full specs & Features

Basic Features

Bedrooms: 5
Baths: 5.5
Stories: 2
Garages: 3

Dimension

Depth: 76'
Height: 34' 6"
Width: 68' 4"

Area

Total: 4284 sq/ft
Basement Unfinished: 2868 sq/ft
Bonus: 498 sq/ft
First Floor: 2896 sq/ft height 9'
Garage: 820 sq/ft
Second Floor: 1388 sq/ft height 9'
* Total Square Footage typically only includes conditioned space and does not include garages, porches, bonus rooms, or decks.

Roof

Primary Pitch: 10:12
Roof Framing: Conventional
Roof Type: Shingle

Exterior Wall Framing

Exterior Wall Finish: Brick/Stone
Framing: Wood - 2x4

Bedroom Features

Guest Suite
Main Floor Master Bedroom

Kitchen Features

Kitchen Island

Additional Room Features

Main Floor Laundry

Garage Features

Side Entry Garage

Outdoor Spaces

Covered Rear Porch

Rooms

Bedroom 2:

182 sq/ft width 14' x depth 13'

Bedroom 3:

198 sq/ft width 14' x depth 14' 2"

Bedroom 4:

168 sq/ft width 14' x depth 12'

Bedroom 5:

162 sq/ft width 13' 3" x depth 12' 3"

Bonus Room - Finished:

376 sq/ft width 11' 6" x depth 32' 9"

Breakfast:

193 sq/ft width 18' x depth 10' 9"

Dining Room:

198 sq/ft width 14' x depth 14' 2"

Family Room:

396 sq/ft width 22' x depth 18'

Foyer:

110 sq/ft width 8' x depth 13' 10"

Garage:

811 sq/ft width 21' 6" x depth 37' 9"

Keeping Room:

217 sq/ft width 14' x depth 15' 6"

Kitchen:

261 sq/ft width 14' x depth 18' 8"

Laundry Room:

54 sq/ft width 6' 9" x depth 8'

Loft:

192 sq/ft width 14' x depth 13' 9"

Master Bathroom:

189 sq/ft width 13' 6" x depth 14'

Master Bedroom:

292 sq/ft width 15' x depth 19' 6"

Master Closet - Hers:

34 sq/ft width 4' 5" x depth 7' 9"

Master Closet - His:

34 sq/ft width 4' 5" x depth 7' 9"

Mud Room:

35 sq/ft width 7' x depth 5'

Porch - Rear:

165 sq/ft width 15' x depth 11'

What's Included

Plans are typically drawn to ¼” scale and include:
  • Foundation Plan(s): Every plan is available with a walkout style basement (three masonry walls and one wood framed rear wall with windows and doors). The basement plans are a 1/4" or 3/16" scale layout of unfinished spaces showing only the necessary 2 x 6 wood framed load bearing walls. These plans are completed with dimensions, notes, and door/window sizes. Crawl space and/or slab on grade foundations are available for some plans. All foundation types are not available for all plans.
  • Floor Plan(s): Each plan consists of 1/4" or 3/16" scale floor layouts showing the location of 2x4 walls, doors, windows, plumbing fixtures, cabinetry, stairs and decorative ceilings. These plans are complete with dimensions, notes, door/window sizes and a schematic electrical layout.
  • Exterior Elevations: All plans include the front elevation at 1/4" or 3/16" and the sides and rear elevations at 1/8" scale or 3/32" scale, and the roof plan at 1/8" or 3/32" scale. These elevations show and note the exterior finished materials of the house.
  • Interior Elevations: Available for some plans. The kitchen and bath elevations show the arrangement and size of each cabinet and other fixtures in the room. These drawings give basic information that can be used to create customized layouts with a cabinet manufacturer. Details are included for many interior and exterior conditions to provide more specific information for their construction.
  • Overhead Roof Plan(s): A view of the home from above showing roof pitch, peaks, valleys, and other details.
  • Cross Section(s): The building sections are drawings which take vertical cuts through the house and the stairs showing floor, ceiling and roof height information.
  • Detail Sheet(s): Each plan order includes one set of typical detail sheets that show foundation details, typical wall sections and other framing details. Also included on the detail sheets are miscellaneous interior trim and fireplace details that can be used to customize the home.
  • Construction Notes / Detail(s): Shows basic parts and assemblies recommended for the home so the builder can see how things come together.
  • Framing Detail(s): Framing plans are not available for all home plans. If included, the framing layout is intended to be a suggested layout only. Design loads and weather conditions vary by region. As a result the size, spacing, and layout of all structural elements in this home design may need approval by a structural engineer or code official based on your specific site location. Each floor framing plan shows each floor joist indicating the size, spacing and length. All beams are labeled and sized. All of the joist are counted and coordinated with the material list (when available). Each framing plan sheet includes any framing details that are needed (tray details, connection details, etc.). All of the framing is designed using conventional 2 X 10 floor joist or wood I-Joist, depending on the span conditions of each home plan. The ceiling joist framing plan shows each ceiling joist indicating the size, spacing and length. All beams are labeled and sized. All of the joist are counted and coordinated with the material list (when available). The roof framing plan shows each rafter, valley, hip and ridge indicating the size, spacing and length. All beams are labeled and sized. All of the joist are counted and coordinated with the material list (when available).

FAQs

Are designs on Houseplans ready to submit to my building department for permitting?

It depends on where you're building. Our plans contain enough information for a professional builder to construct your home, but your local government may require additional information before permitting. We strongly advise that you talk with your builder before you get started. If you are building for yourself, we recommend visiting your local building department to start your diligence. Read more here.

Can I make changes to a plan?

Absolutely! Our modification service allows you to customize almost anything - whether it's adding an extra garage bay, adjusting square footage, changing the roof pitch, or more, the plan modification service is a great value and can be completed quickly. Additionally, if you purchase an electronic plan set (PDF or CAD), you may have the option to make changes locally. CAD files offer the most flexibility for custom edits. Just let us know what you're thinking, and we’ll provide an estimate and timeframe to get started. Learn more here.

How much does a house cost to build?

Find out! Build costs vary based on the size of the home, materials used, and local rates for goods and labor. Our Cost to Build report is a great way to get some basic costs dialed in before you order your plans. Just plug in your postal code, select your desired construction quality, and we'll calculate for you.

Learn more about Cost to Build reports here.

Can I trust Houseplans?

Founded in 2004, Houseplans works with hundreds of architects and designers to offer their plans at a fraction of the price of custom design. Houseplans has an "Excellent" rating on TrustPilot.

Read more about us here.

Does Houseplans offer live support?

Yes, Houseplans has a dedicated team of house plan advisors with decades of experience between them. You can reach them by calling, emailing, filling out a form on the page of a plan that you like, or going to the Contact Us page. We're available to talk every day, even on weekends.

Builder Advantage Home

Builder Advantage Program

Are you a Pro Builder? Join the club, save 5% on your first order, get exclusive discounts, and more.

Learn More