Call HouseplansCall us at 1-800-913-2350
Photographs may show modified designs.
Plan 930-287

Key Specs


2191
sq ft

3
Beds

2.5
Baths

1
Floors

2
Garages

Plan Description


The exterior of this beautiful brick-and-stucco home is a lovely European rendition; inside, this plan is modern and sophisticated, designed for today's family. The entry presents a study and a dining room on either side of the foyer. The great room warms with an extended-hearth fireplace and lets in lots of natural light through three sets of French doors. An exposed-beam ceiling adds a touch of vintage elegance. The U-shaped island kitchen opens to a deep-set bayed nook. Two family bedrooms share a full bath with dual vanities. On the far left, the master suite revels in a tray ceiling, veranda access, twin walk-in closets and a luxurious bath with a walk-in shower and whirlpool tub. Don't miss the ample storage space and utility room off the two-car, side-loading garage.
This plan can be customized!
Tell us about your desired changes so we can prepare an estimate for the design service. Click the button to submit your request for pricing, or call 1-800-913-2350.

Floor Plans


Floor Plan - Main Floor Plan

Reverse

Full Specs & Features


Basic Features

Bedrooms : 3
Baths : 2.5
Stories: 1
Garages: 2

Dimension

Depth : 73' 6"
Height : 26'
Width : 62' 10"

Area

Total : 2191 sq/ft
First Floor: 2191 sq/ft
*Total Square Footage only includes conditioned space and does not include garages, porches, bonus rooms, or decks.

Roof

Primary Pitch : 7:12
Roof Framing : Combination Truss/Conventional
Roof Type : Shingle

Exterior Wall Framing

Exterior Wall Finish : Brick/Stucco
Framing : Wood - 2x6

Bedroom Features

Fireplace
Formal Dining Room
Formal Living Room / Parlor
Main Floor Master Bedroom
Split Bedrooms

Kitchen Features

Breakfast Nook
Kitchen Island
Kitchenette Wet Bar

Additional Room Features

Den Office Study Computer
Great Room Living Room
Main Floor Laundry
Open Floor Plan
Storage Area
Sunroom

Garage Features

Side Entry Garage

Outdoor Spaces

Courtyard
Covered Front Porch
Covered Rear Porch
Deck
Screened Porch

Rooms

Bedroom 2:

147 sq/ft width 11' 4" x depth 13'

Bedroom 3:

147 sq/ft width 11' 4" x depth 13'

Breakfast Room:

105 sq/ft width 10' x depth 10' 6"

Dining Room:

134 sq/ft width 11' 10" x depth 11' 4"

Foyer:

58 sq/ft width 6' x depth 9' 10"

Garage:

569 sq/ft width 21' 6" x depth 26' 6"

Kitchen:

122 sq/ft width 12' x depth 10' 2"

Master Bathroom:

115 sq/ft width 10' x depth 11' 7"

Master Bedroom:

195 sq/ft width 13' x depth 15'

Study:

135 sq/ft width 10' 8" x depth 12' 8"

Utility Room:

53 sq/ft width 7' 6" x depth 7' 2"

What's included in this plan set


See a sample plan set

Sater Design Collection charges $50.00 to review plan changes and prepare an estimate for your modifications. This fee can be applied to your plan purchase once you move forward with the modifications. Please call if you would like to order a Plan Modification quote from the Sater Design Collection.

Some of Sater Design Collection's ready-made house plans are not for sale in Lee and Collier Counties of Florida. Please give us a call if you are building in one of these counties.

Cover Sheet, Index & Site Plan: The cover sheet features an elevation of the exterior of the house that shows approximately how the home will look when built. The index lists the order of the drawings included, with page numbers for easy reference. The site plan is a scaled footprint of the house to help determine how the home will be placed on the building site.

Wall Sections & Notes: This section shows section cuts of the exterior wall from the roof down through the foundation. These wall sections specify the home’s construction and building materials. They also show the number of stories, type of foundation and the construction of the walls. Roofing materials, insulation, floor framing, wall finishes and elevation heights are all shown and referenced.

Typical Details & Notes: This section addresses all the facets and typical details you will want to include in your home, with the exception of local building code requirements. Architectural and structural elements are detailed, including: window and door components, railings, balusters, wood stairs and headers, interior walls, interior partitions, concrete steps and footings (if applicable).

Foundation layout Plan: This sheet provides a fully dimensioned and noted foundation layout, including references to footings, pads, and support walls. For plans with a basement, additional walls and columns may be shown. Basement plans come with a floor framing layout which may be included in this section or the floor framing section, depending on the plan. *Actual structural information should be obtained by a locally licensed engineer for your specific site location.

Detailed Floor Plan: This section provides detailed floor plan drawings and descriptions of all the elements that will be included on each floor of the home. The home’s exterior footprint, openings and interior rooms are carefully dimensioned. Important features are noted including built-ins, niches and appliances. All doors and windows are identified. Typically this section also includes the square footage information.

Reflected Ceiling Plan: One of Sater home’s most distinguishable features is the highly detailed ceiling treatments. This section shows ceiling heights and treatments. It also shows the details, profiles and finishes of the ceiling treatments. Arches and soffits are also specified in this section.

Floor Framing Plans: Homes with a basement or crawl space will have a floor framing plan for the first floor. Multi-story homes will have floor framing plans for upper floors as well. The floor framing plans provide structural information such as the joist location, spacing and direction, as well as the floor heights and stair openings.

Roof Layout: The overall layout and necessary details for roof design are provided in this section. If trusses are used, we suggest using a local truss manufacturer to design your roof trusses to comply with your local codes and regulations.

Exterior Elevations: Exterior elevations are drawings that show how the finished home will approximately look. In this section, elevations of the front, rear and left and right sides of the home are shown. Exterior materials, details and heights are noted on these drawings.

Building Section & Details: This section will illustrate the important changes in the floor, ceiling and roof heights or the relationship of different floors to one another. Interior elements of rooms and areas, such as columns, arches, headers and soffits, are also discernible and easier to visualize in a cross section.

Interior Elevations: These interior elevations show the specific details and design of the kitchen, bathrooms, utility rooms, fireplaces, bookcases, built-in units and other special interior features. The interior elevations vary based on the complexity of the home.

Electrical Plan: This section shows an electrical plan that will enhance functionality and highlight the unique architectural features of the home.

*See important information before purchasing

Pricing


Plan Options

PDF Set

Best Value!
$1162.00
PDF plan sets are best for fast electronic delivery and inexpensive local printing.

Reproducible Set

$1162.00
For inexpensive local printing / making minor adjustments by hand. 1 printed set, typically on Bond paper.

CAD Set

$1973.00
For use by design professionals to make substantial changes to your house plan and inexpensive local printing.
Foundation Options

Stem Wall Foundation

$0.00
Joins the foundation with a house’s vertical walls; often part of stem-wall slab foundation systems, which are constructed like a crawlspace foundation but filled in and compacted, then the slab is poured.

Crawlspace

$475.00
Ideal for semi-sloped or level lot, home can be built off of grade, typically 18” - 48”.

Wood 2x6

$0.00
Wood 2x6

*Options with a fee may take time to prepare. Please call to confirm.

Additional Options:

Right-Reading Reverse

$275.00
Choose this option to reverse your plans and to have the text and dimensions readable.

Additional Construction Sets

$65.00
Additional hard copies of the plan (can be ordered at the time of purchase and within 90 days of the purchase date).

Audio Video Design

$100.00
Receive an overlay sheet with suggested placement of audio and video components.

Construction Guide

$39.00
Educate yourself about basic building ideas with these four detailed diagrams that discuss electrical, plumbing, mechanical, and structural topics.

Home Furniture Planner

$19.00
This fun visual aid lets you peel-and-stick furniture on a generic layout to plan out spacing.

Lighting Design

$100.00
Receive an overlay sheet with suggested placement of lighting fixtures.

Material List

$150.00
A list of building supplies needed to construct the infrastructure of your new house.

Unless you buy an “unlimited” plan set or a multi-use license you may only build one home from a set of plans. Please call to verify if you intend to build more than once. Plan licenses are non-transferable and cannot be resold.

Meet the Designer - Sater Design Collection

Sater Design Collection - Houseplans.com
We give the same attention to detail in the pre-drawn house plans we sell, that we give to our custom, luxury home designs. I meticulously think through every aspect in creating these unique home designs, as if I was designing it for myself and my family.

Sater Design Collection was established in 1994. It was created by Dan F. Sater II, FAIBD/CPBD/CGP, as an evolution from his award-winning custom home design business, The Sater Group, established in 1984. In an effort to combine custom quality designs with more affordable pre-drawn house plans, Sater Design Collection has become one of the country’s most recognized residential design firms specializing in luxury home plan designs. Sater Design Collection has been selling pre-drawn house plans online since 1996. We are located in Bonita Springs, which is in Southwest Florida. Our online presence has allowed us to service customers from all over the country, as well as internationally.

Dan Sater II is the President and CEO of The Sater Companies. With over 35 years of experience, he is a Certified Professional Building Designer, Certified Green Professional, an active member and a past national president of the American Institute of Building Design, and a professional member of the Institute of Classical Architecture. His ability to create home designs with open flowing interiors that interact with expansive outdoor spaces is unmatched. In fact, Sater designs have earned over 450 design awards. Dan Sater’s tireless dedication to craft homes that reflect his unique sense of casual elegance has earned international acclaim.

Other Plans By This Designer

Need help?  Let our friendly experts help you find the perfect plan!

Contact us now for a free consultation.